Category Archives: Tyre repair

Motorcycle tyre repair kit

I use the following tools and kit for plugging punctures on the go. I ride on tubeless tyres mainly so most repairs involve plugging the puncture and then re-inflate, a really simple procedure. I do carry tubes in case the tyre needs to be removed on the roadside and I can’t re-install the tubeless tyre, a more involved job. If you use a tube in a tubeless tyre make sure that the tyre can support this setup!

Stop ‘n Go – Tubeless tyre repair kit
The easiest tyre plugging kit that I have used to date, a punctured tubeless tyre can be plugged in a couple of minutes without removing the wheel.

The Plugging device ‘drives’ the plug into the hole with a turning of the hex wrench. The plug expands under pressure to fill the punctured area. A firm pull on the stem with your pliers’ seats the mushroom head on the inner wall allowing no air to escape.  The re-inflate, simples…

Slime 12v air compressorPortable 12v air compressor
Great little air compressor, weighing only 950g and can inflate a tyre to 37 psi in only 4 minutes. It conveniently powers directly off the bike’s external power socket. An air compressor is handy as you can deflate your tyres if you need more traction on sand etc. and then easily re-inflate the tyres when the surface improves.


2 x 8” tyre levers – Motion Pro
Compact and lightweight. I only carry 2 levers; I improvise a 3rd lever from another similar shaped tool at hand.

Rema Top Tip
Tube puncture repair kit, includes a few spare valve cores.

Spare Tubes
I carry 2 spare tubes, a front and rear, for emergencies or for replacing a tyre and I don’t have access to the right kit for installing the tubeless tyre. If space/weight is a concern, a single front tube as it will work in both wheels.

Temporary 90’ valve adapter
A handy solution for accessing those hard to reach tyre valve stems. Just screw the adaptor onto the valve stem and any air hose or foot pump will fit easily.